January 20, 2022, 20:17

How NASA’s Webb Telescope works and other facts you need to know

How NASA’s Webb Telescope works and other facts you need to know

On Christmas Day, NASA is launching into space its biggest, most expensive and most powerful telescope yet.

The James Webb Space Telescope will rocket into the cosmos and orbit nearly 1 million miles away from Earth.

MORE: NASA Webb Telescope launches Christmas Day: What to know

If the launch is successful, the telescope will spend five to 10 years studying the formation of the universe’s earliest galaxies, how they compare to today’s galaxies, how our solar system developed and if there is life on other planets.

ABC News explains how the telescope works, how it compares to its predecessor — the Hubble Telescope — and what needs to happen for the mission to go just right.

M. Pedoussaut/ESA via APThe NASA James Webb Space Telescope is mounted on top of the Ariane 5 rocket that will launch it from Europe’s Spaceport in French Guiana.

The history of the Webb Telescope

The Webb Telescope was jointly developed by NASA, the European Space Agency and the Canadian Space Agency.

Development first began in 1996, when it was known as the Next Generation Space Telescope, before it was renamed in September 2002 after James Webb, who was the head of NASA in the 1960s and helped launch the Apollo program that eventually went to the moon.

The project suffered from numerous setbacks and delays, including a redesign into 2005, and ended up costing $10 billion.

Construction was completed in 2016, and the Webb Telescope underwent extensive testing before it was approved for launch.

How does it work?

The Webb Telescope is an infrared telescope, meaning it uses infrared radiation to detect objects in space.

It is able to observe celestial bodies, such as stars, nebulae and planets, that are too cool or too faint to be observed in visible light — what is visible to the human eye.

ABC News Photo IllustrationThe Webb Telescope is the largest, most expensive and most powerful telescope NASA has ever built.

Infrared radiation is also able to pass through gas and dust, which appear opaque to the human eye, according to NASA.

This is different from the Hubble Telescope, which sees visible light, ultraviolet radiation and near-infrared radiation.

What are the goals of the Webb Telescope?

There are four goals of the Webb Telescope. Firstly, scientists want to study the first stars and galaxies formed right after the Big Bang.

Normally, humans wouldn’t be able to see this because, as light travels through the universe, it gets stretched and becomes infrared, which is invisible to the naked eye.

Chris Gunn/NASA via APJames Webb Space Telescope Optical Engineer Larkin Carey examines two test mirror segments on a prototype at the Goddard Space Flight Center’s giant clean room in Greenbelt, Md.

But an infrared telescope will be able to detect this light, which has been traveling toward Earth for more than 13 billion years, essentially allowing the Webb Big Bang to look back in time.

This leads to the second part of the mission: comparing the galaxies from the past to those of today.

Thirdly, because infrared radiation can pass through astronomical dust, which can’t be viewed on a visible-light telescope — such as Hubble — the Webb Telescope will be able to study how stars and planetary systems, such as our solar system, formed, NASA explained.

Lastly, the telescope will study planets outside of our solar system to see if there are any signs of life or if they have atmospheres capable of sustaining life.

What is needed for the mission to be successful?

According to a report conducted by an independent review board in 2018, there are 344 “single-point failures,” or steps that need to work for the mission to succeed.

The telescope will be tucked inside the nose of an Ariane 5 rocket and will be launched from the European Space Agency’s Spaceport in French Guiana around 7:20 a.m. ET, according to the official countdown.

It will separate from the rocket after the launch and begin unfolding. According to NASA, about 30 minutes after the launch, the solar panels will unfold so the telescope can get power from the sun.

Chris Gunn/NASA/ReutersThe Sunshield test unit to be used on NASA’s James Webb Space Telescope is stacked and expanded at a cleanroom in the Northrop Grumman facility in Redondo Beach, California.

About two hours later, the antenna will deploy, so the telescope can communicate back to Earth.

Three days later, the sunshield, which is 69.5 feet by 46.5 feet — about the size of a tennis court — will deploy.

MORE: Hubble telescope's bigger, more powerful successor to soar

In order for the instruments aboard to work, they need to be kept at extremely cold temperatures: -370 degrees Fahrenheit or lower. The sunshield protects the telescope from the heat of the sun and keeps the instruments cold.

Next, the mirrors will start unfolding and latching into place so they can reflect light.

Overall, it will take 29 days for the telescope to reach the final stop on its journey and settle into orbit nearly 1 million miles from Earth.

Comments (0)Share to FacebookShare to TwitterEmail this article

Sourse: abcnews.go.com

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *